2.Troubleshooting Tips, Known Bugs & Fixes

Serious poster Posts : 62 Join date : 2016-06-30

The_MisFitz wrote:: First of all, this is a wonderful pack! Thank you so much Rotten for working sso hard to make this available to all of us!

I'm about 18 hours into my game and I'm running into issues with saving. It crashes whenever I try to save my game or whenever an autosave action takes place (sleeping). This happened in the past and I just reverted to the previous save and rewrote it with no issues. However this time, it seems like every savegame I load, no matter how far in the past they are, it crashes when I try to save the game.

EDIT: I have also tried to disable autosave and it still crashes whenever I try to manually save.

EDIT #2: I seemed to have worked around it. I loaded a gamesave twice and then saved over it with no crash. So I guess my question has changed. Any ideas on what the cause of this is and how to stop it? I'd rather not have to double-load my game every time I play.

Welcome to painland. type player.kill then reload the same save again. There is absolutely nothing you can do about it except this one. Also there isn't just three people reported it. There are many people having the same issue but doesn't post it much.

I have been asking for this problem on many forums but the closest and logical answer was that conflicting leveled list and outdated mods was causing conflict (i don't know really)

I used TESEDIT then selected "apply conflicted losers" option for all mods. In results there was only two mod gave "italic purple colored" error.

Sadly no matter what i do within my little knowledge, the crash was inevatible.

Serious poster Posts : 62 Join date : 2016-06-30

About cleaning masters and redoing proccer patches. Doing these makes the game so buggy, it's unplayable.

So far encountered problems are;

Unable to absorb dragon souls, unable to read word of power from anywhere, missing Dawnguard npc names, nude citizens around and missing weapon textures.

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Mon Sep 05, 2016 4:07 pm

yeah rotten sorry for that but u never answer my questions and my windows or anything isnt unstable i have 50+ games installed on my pc and i have 0 issues with any of them everything is everywhere stable the only problem is ur modpack if u know what im doing wrong then please tell me i have reinstalled redistributable 2015/2013 annd all redistributables that i have found to the newest versions and when i was installing skyrim and ur modpack i did this: installed skyrim through steam at my default c drive default location then i shrinked my hard drive to 102400MB X drive and extracted my skyrim from steam C drive there so the path would be X:\Skyrim and unticked read only in C my games skyrim (where the saves go) and unticked it also in the X skyrim and in every skyrim folder i have then i extracted ur skyrim perfectly modded 4.3.7 or whatever was that version i got from u i extracted it to desktop 2 times with 7zip then i extracted it 2 times again to X\Skyrim and downlaoded ur high enb preset i set my vram in it 4064 and put it into X\Skyrim then i unticked read only for that folder again and launched mod organizer (im launching mod organizer as administrator) and i allways launch skse through mod organizer and from there i just created a new save and configured mods and played i have set in ASIS 70% for no spawns in both sections of ASIS 10% for 1 additional spawn 10% for 2 additional spawns and 10% for 3 additional spawns for both sections of ASIS also i have in immersive creatures turned on everything and difficulty set to adept but unticked the bonus armor stats and damage and in ultimate dragons and deadly dragons i have set everything as u showed in the video and in xmpse i have everything as u shown in the video as well i would rather screen all my mod configuration settings but that would take a lot of screenshots can u please help me and i will stop bothering u i just want to fix my issue and play :( i dont want to be an asshole :(

Guest

Hey mate
Im new to the Perfectly Modded pack, however ive been modding skyrim on pc for years and have generally been able to get up to around 50 mods semi-stable myself in the past on this pc. following the guide was fairly easy, i started with a fresh Steam install of Skyrim, run it once to get the files loaded etc. Downloaded the pack, extracted the files to a folder, had to extract again for file integrity, followed the rest of your guide and ran the game. However I got a message when installing the extracted pack into the Steam Skyrim folder telling me that one of the mods 'Tundra Defence' had a bunch of files with filepaths that were too long for windows to accept. So i had to skip them.

As far as i know this isnt another way to shorten the filepath name besides moving the whole steam folder to C:/ which i imagine might break some shit too.

However, while the game runs and I can play it for about 15 minutes or so, it seems to crash about ~15 minutes in every time, not sure if youd be able to assist?

Rookie poster Posts : 9 Join date : 2016-04-15

anyone got any idea why i'm getting 15 fps in and around Windhelm? I can't be the only one getting this. using pack 4.3

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Tue Sep 20, 2016 4:38 pm

dilligaf109 wrote:: anyone got any idea why i'm getting 15 fps in and around Windhelm? I can't be the only one getting this. using pack 4.3

CPU/GPU/RAM?

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Fri Sep 23, 2016 8:05 am

Hey rotten i ask u once more nicely as ur fan please could you rewrite the complete install process for me steam install C:\Program Files (x86)\Steam\steamapps\common\Skyrim Its very confusing what to do and where to download there are different things written all over the forum and i dont know what to do please :(

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Fri Sep 23, 2016 8:53 am

ppsgr81 wrote:: Hey rotten i ask u once more nicely as ur fan please could you rewrite the complete install process for me steam install C:\Program Files (x86)\Steam\steamapps\common\Skyrim Its very confusing what to do and where to download there are different things written all over the forum and i dont know what to do please :(

Ummm...NO!

God dammit you really are an asshole!

Serious poster Posts : 62 Join date : 2016-06-30

A bug report.

Ivarstead bridge kinda looks fucked up. Sometimes guards spawning under bridge and stuck on bugged dock.

New Face! Posts : 3 Join date : 2016-10-04

cssrp wrote:: Hey there guys, I have spent all day trying to sort this issue. Npcs seem to be fine but my character has a dark colored head and neck in comparison to the body. Have tried to uninstall and reinstall skyrim/mods many of a time. But no dice. Thanks in advance and yeah I am nubIf you guys have any tips it would be greatly appreciated.

Anyone found a fix for this yet? just tried to play for the first time and been plagued with this issue, potentially looking at TES5Edit, but idk. Someone help please!!

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Tue Oct 04, 2016 9:22 pm

It could be that MO can't/won't/doesn't/isn't allowed(admin rights) see CBBE HDT body's and high res textures for the pack this could be due to bad load order, doesn't have enough access to file (admin rights) or pack installed with a wrong pack path.

New Face! Posts : 3 Join date : 2016-10-04

RottenDub wrote:: It could be that MO can't/won't/doesn't/isn't allowed(admin rights) see CBBE HDT body's and high res textures for the pack this could be due to bad load order, doesn't have enough access to file (admin rights) or pack installed with a wrong pack path.

What's your suggested action for a fix on that?

Dragon Slayer Posts : 196 Join date : 2016-03-11

dingodoggo69 wrote:

RottenDub wrote:: It could be that MO can't/won't/doesn't/isn't allowed(admin rights) see CBBE HDT body's and high res textures for the pack this could be due to bad load order, doesn't have enough access to file (admin rights) or pack installed with a wrong pack path.

What's your suggested action for a fix on that?

Check the MO executable's properties to make sure Run As Admin is selected, cross check the load order in the right and left panes within MO with the proper load order listed somewhere on the forum here, and check your file path to the pack, everything should be in X:\Skyrim, not X:\Skyrim\Skyrim or X:\The Elder Scrolls IV Skyrim or something.

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Wed Oct 05, 2016 7:43 am

It seems that when i set in deadly dragons all the dragon attack options ( 2 dragons,3 dragons and weather effect) im getting save crashes so i have started a new game with completely everything set the same as rotten in his video

New Face! Posts : 3 Join date : 2016-10-04

Tenka wrote:

dingodoggo69 wrote:

RottenDub wrote:: It could be that MO can't/won't/doesn't/isn't allowed(admin rights) see CBBE HDT body's and high res textures for the pack this could be due to bad load order, doesn't have enough access to file (admin rights) or pack installed with a wrong pack path.

What's your suggested action for a fix on that?

Check the MO executable's properties to make sure Run As Admin is selected, cross check the load order in the right and left panes within MO with the proper load order listed somewhere on the forum here, and check your file path to the pack, everything should be in X:\Skyrim, not X:\Skyrim\Skyrim or X:\The Elder Scrolls IV Skyrim or something.

Would you have a link to the load order post? Been searching and found nothing.

*Edit: just found the page and adjusted my load order to what i believe is correct using the guide. Also ran MO as admin. Still getting the brown face with no fix. All my file paths are correct.

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Tue Oct 18, 2016 3:10 pm

dingodoggo69 wrote:

cssrp wrote:: Hey there guys, I have spent all day trying to sort this issue. Npcs seem to be fine but my character has a dark colored head and neck in comparison to the body. Have tried to uninstall and reinstall skyrim/mods many of a time. But no dice. Thanks in advance and yeah I am nubIf you guys have any tips it would be greatly appreciated.

Anyone found a fix for this yet? just tried to play for the first time and been plagued with this issue, potentially looking at TES5Edit, but idk. Someone help please!!

I also have this issue, running with admin rights did not work.

Subject: lag issue Mon Oct 31, 2016 7:20 pm

hi.
first I wanted to say this pack is everything I wanted. and it is very good. the game looks good and fps is great. but the only problem is lag specially during combats.
I don't know that it's lag or stuttering (I actually don't know the difference). for example when I try to cast a fireball or any other magic the game freezes for two seconds.
Also some times when I move the mouse I get stuttering. I'm getting 40-55 fps and I even used enb limiter and capped the frame to 40 but still getting lag.
here is my spec:
GPU: GTX 960 4gb
CPU: Intel Core i5-4690 3.50 GHz
Ram: 8 gb

I think my spec should be enough for this game. I even put the UseDefferedRendering in enblocal to false and put the shadow to medium.
Is there any way to make this better. maybe disabling some mods.
thanks

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Wed Nov 02, 2016 1:54 am

afshin76 wrote:: hi.
first I wanted to say this pack is everything I wanted. and it is very good. the game looks good and fps is great. but the only problem is lag specially during combats.
I don't know that it's lag or stuttering (I actually don't know the difference). for example when I try to cast a fireball or any other magic the game freezes for two seconds.
Also some times when I move the mouse I get stuttering. I'm getting 40-55 fps and I even used enb limiter and capped the frame to 40 but still getting lag.
here is my spec:
GPU: GTX 960 4gb
CPU: Intel Core i5-4690 3.50 GHz
Ram: 8 gb

I think my spec should be enough for this game. I even put the UseDefferedRendering in enblocal to false and put the shadow to medium.
Is there any way to make this better. maybe disabling some mods.
thanks

Hello! The only problem i see is your CPU which might be a little to weak for the pack.There are numerous performance tweaks and guides both on the forum and on the website.

You should re-build the bashed patch and only allow 20 actors in combat and 40 active NPC's in general.

TL;DR
•Performance
1.Reduce ASIS spawns

Enlarge this image Click to see fullsize
2.Troubleshooting Tips, Known Bugs & Fixes - Page 2 Screen_Shot389

2.Troubleshooting Tips, Known Bugs & Fixes - Page 2 Screen_Shot389

2.Nvidia

Enlarge this image
2.Troubleshooting Tips, Known Bugs & Fixes - Page 2 Image

3.Grass density can eat 10-15 FPS
4.ENB can eat 10-15 FPS

New Face! Posts : 3 Join date : 2016-11-02

My character is stuck in T pose after configuring fnis

madhatter9691 wrote:: My character is stuck in T pose after configuring fnis

Q: I have no char animation (aka T-pose)
A: Locate GenerateFNISforUsers.exe via search in the Skyrim folder, right click, properties, compatibility tab, ensure run as admin is selected.

-Run FNIS through MO
-Only click the first 2 options (gender specific and skeleton arm fix)
*For 4.4 also tick TK dodge.
-If momo jump is ticked, detick it.
-Right Click overwrite folder >>> Create new mod >>> FNIS movement.

http://perfectlymodded.weebly.com/troubleshoot.html
http://perfectlymodded.weebly.com/tutorials.html

New Face! Posts : 3 Join date : 2016-11-02

I did that but fnis came up with an error code 9 saying it's outside of the array

Subject: Re: 2.Troubleshooting Tips, Known Bugs & Fixes Wed Nov 02, 2016 2:00 pm

madhatter9691 wrote:: I did that but fnis came up with an error code 9 saying it's outside of the array

Anatriax, on 25 May 2015 - 02:47 AM, said:

Anatriax wrote:: I get this error frequently on a first run of FNIS after a clean install. It's happened to me since 5.1. The solution I've always found was to just rerun it, without deleting overwrite. Everything seems to work fine after that.

New Face! Posts : 3 Join date : 2016-11-02

Ok I've followed the tutorial on FNIS I've tried everything including keeping the files on overwrite but it just produces error code 9 over and over I've followed every tutorial but all characters stuck in t pose and error code 9 I've done everything and nothing has changed

New Face! Posts : 1 Join date : 2016-11-13

dingodoggo69 wrote:

cssrp wrote:: Hey there guys, I have spent all day trying to sort this issue. Npcs seem to be fine but my character has a dark colored head and neck in comparison to the body. Have tried to uninstall and reinstall skyrim/mods many of a time. But no dice. Thanks in advance and yeah I am nubIf you guys have any tips it would be greatly appreciated.

Anyone found a fix for this yet? just tried to play for the first time and been plagued with this issue, potentially looking at TES5Edit, but idk. Someone help please!!

So i just made an account to share a possible solution, i ran into this same problem and had me stumped for 2 days..... i turned off Overwolf and now its fine. I hope that helps you.

Rookie poster Posts : 5 Join date : 2016-11-13

madhatter9691 wrote:: Ok I've followed the tutorial on FNIS I've tried everything including keeping the files on overwrite but it just produces error code 9 over and over I've followed every tutorial but all characters stuck in t pose and error code 9 I've done everything and nothing has changed

Yeah I am having the same issue. I have tried to reinstall FNIS, I have ran ALL of the Redist, I have it set up as admin, I have moved a new load.txt file over, I have checked my loadorder, I have re-ran FNIS after is gives the error, I don't know what else to do...

Edit: I deleted the WHOLE Profile, not just the Loadordertext thing, and that seems to have fixed it.

New Face! Posts : 1 Join date : 2016-12-20

Hi, I have a problem with the installation and I really don't understand, I hope you can help me, i'm not really good with this kind of thing sadly...
I did everything like in the video, but when I try to start in MO SKSE, it tell me that they can't find TESV.EXE. I don't know what do to.
I have this too...

2.Troubleshooting Tips, Known Bugs & Fixes - Page 2 Proble11

Thanks for your help and sorry for my bad english !

New Face! Posts : 1 Join date : 2017-09-15

So I spent a week trying to do this and even upgraded my computer with 800$. Can someone please please please walk me through step by step to install this fail-proof? I'm good with computers but this simple thing does not make sense to me.

SKYRIM crashes when I try to run SKSE. No warnings. Nothing. Just screen goes black.

Here are my specs:
Processor: Intel (R) Core(TM) i5-3350P CPU
Memory ram: 16 GB
System type: 64-bit Windows 10
NVIDIA GEFORCE GTX 1070.
My wattage is 500.
Just did a factory reset as well. Running Skyrim through steam.

New Face! Posts : 1 Join date : 2017-12-13

I CTD when talking to merchants

here is load order if necessary

Spoiler: